Thursday, February 3, 2011

All In The Family

Last May I was able to visit my niece's apiary in Oakland. CA.   She started beekeeping shortly before I did in 2009.  We did not know of each other's interest at first.  It has been helpful to have a family member who "understands."  I posted about my visit last year but shortly afterwards there was a problem with my blog and updating on blog rolls.  My posts were not showing up anywhere.  In the process of fixing the problem I deleted the blogs that did not update.  One of them deleted was this post and I wanted to get it back up.  It is not quite swarm season in So Cal so this is a good time to revisit the visit. 

Tricia's bees are located on a slope between the front of her house and the street.  There is plenty of vegetation to screen the bees and the hives are visible from the deck above.  In her area, May is when the bees are really starting to work.  Located close to the San Francisco Bay it can be cool well into the Spring. She wanted to see how the hives were doing.

 The top super did not have much activity but the other two were loaded with bees.


 In the two shots above you may find the queen.  When Tricia spotted it and pointed her out I tried to snap off a shot but usually she was gone by then.  See if you can find her, I didn't.
 Lots of bees and capped honey on all of the frames in the second super.  There was all sorts of things going on in the hive.

Queen Cell maybe a swarm or a new queen.
Opened Queen Cell
Click on this and look closely at the bee in the middle and you can see an egg in the cell just off her wing tip.
Nurse bees and larvae

This hive was very healthy and active with a prolific queen so Tricia closed it up

On to the small hive populated by a collected swarm.

These were very nice little girls, never complaining about how they were handled.  The beek was gentle.

This is a single super and still had some sugar water in the baggie

After a cursory check, Tricia decided to not bother them any more after adding another super..

The beek and her girls all back in place.
 It was a fun visit and nice to have time to take a lot  of pictures (90+) for the blog.  Her Mom & Dad are doubly happy, honey from two sources.. Northern and Southern California.  This year we will have to compare honey.
 

Thursday, January 13, 2011

The Bee Vac As Art


 

Basically a Bee Vac is a couple boxy pieces that fit over and under a super or nuc used to collect bees using a shop vac.  I have seen Steve Rosales use his a couple of times.  He made his according to plans and ideas from Robo's World BushKill Bee Blog.  I decided I could use one but wood working is not one of my skills.   Fortunately I was able to trade some cooking skills with my good friend Steve Shultz (the guy in the picture.) for a bee vac.  I had scanned over Robo's page and seen Steve Rosales' bee vac in action so I had an idea of what I wanted.  The only real change I suggested was side rails to keep the super from shifting when in transit.
Any time you make a simple suggestion to an engineer expect more than simplicity back.  
Steve is an engineer with imagination and loves a challenge.  He delivered, big time. He read through all the notes from other bee vac makers and incorporated some of their ideas and a few of his own.


The basic two piece unit with a slopped floor raising from the intake hole on the bottom piece.
Both pieces have dove-tail joints on the corners
Intake hole cover is held in place with magnets and easy to open or close, even with bee gloves on.

Rubber gaskets are around all sides on both pieces.  The super sits inside on top of the gaskets of the bottom and the same for the top piece.. A little extra space within the top and bottom allow supers that are not quite square to still sit on the lip tightly.

Custom made brackets for a ratchet strap that is tied other side of the top piece.  When tightened the top and bottom pieces will fit tightly and there will be no spaces for bees to leak out during transit.

Top piece with a screen bottom below the outflow hole for the vacuum.
Top piece cover, air flow controller.  There are magnets on the four corners to hold it in place and magnets in the top frame piece
Air flow controller in place and partially open

Underside of the bottom showing the slanted floor and rubber feet
Bee Vac with a spacer between the two pieces for storage without a super between them
 
Bee Vac closed and secure for moving.
The craftsman and the Bee Vac. The outside wood is all sealed, interior is raw wood with no sealer  or paints.
Thank you Steve for a job very well done and Robo who made the earlier version and also Steve Rosales for showing me how to use a Bee Vac.  All just in time for the Spring Flow, who could ask for more?

(The Bee Vac will show up at the meeting on Jan. 16.)

Tuesday, December 28, 2010

A Bee-ful Christmas


 Santa Claus was very kind to the Beekeeper In The Dale, starting off with a beekeeper nutcracker and a good read, The Queen Must Die,

The Wee Beekeeper checking out both hives.  It was sunny earlier and the bees were hard at work.  I elected to not bother them with the Nutcracker as long as they were in a working mood so there is only a glimmer of.sun in these shots.  By 4PM on the Left Coast the bees are mostly inside.

The next present was a very nice Beekeepers Tool Box from Brushy Mountain.  It is very well designed to hold most of the tools plus it can serve as an emergency nuc.   It will hold five frames.  The side holder above is supposed to hole the bee brush but I have a zip tie loop on mine and it does not fit that space.  But it works very nicely to hold my comb knife.   On the picture to the right you will notice the white frame perch ( included from Santa).  There are two slots to the perch can be carried along in the present position and not get in the way.  You can also turn the perch around, use the same slots and put frames on the perch.  The toolbox is heavy enough and quite stable, it will not tip over.  It does not show up well but on the back of the tool box is slot made to hold a hive tool. Two of them fit in easily.
 
There is plenty of room inside for most of my tools, gloves etc.  When the lid is closed and the frame perch removed, the toolbox can serve as a stool also (if you have better knees than I do.)


When the smoker bellows is depressed, the smoker can be easily  mounted on the lip in the front of the tool box and carried that way.   There is another space created on the left side  that is made to hold a frame removal tool.   I do  not have one of those so I will find another use for it.  ( I will take another picture later to show that space.. not blocked by my hose reel.)

The Beekeeper Nutcracker inside on its perch, across from the vintage trailer birdhouse.  (Another hobby, vintage trailers, not birdhouses.)

Santa also included a Brushy Mountain baseball cap and some very nice glass jars with lids that will make great gifts and labels for them too.   With the Winter Solstice the days are slowly getting longer.  The bees are out at every opportunity.  Honey will be happening very soon and I will make good use of the jars.

Thanks Santa for the fine bee stuff and a bunch more too.

(THE TOOL BOX WILL BE AT THE NEXT BACKWARDS MEETING IF YOU WANT TO CHECK IT OUT.)

Monday, December 6, 2010

One Sunny Day

The weather in the LA area has been all over the place lately.  There have been days of rain and nights colder than usual.   It has been a hard season for the bees.  I generally go out and glance at the hives most days, just a quick shot never opening the hives.   From what I hear the bees are less than friendly when the weather is not to their liking.
I have noticed that for the last three - four weeks the number of bees going in and out is much lower and they may be active only for a few select hours a day.  During the cold snap they would be out if the sun was shining but as soon as the temperature dropped any at all they were quickly back inside.

Today I was out around 9AM and the sun was up nicely.  I had recently cut the fronds off the palm tree that shaded the Twitchy Hive.   The bees seem to have approved of that.








The bees were pouring out of every nook and cranny.  When I had put the opening restriction in place I was not garbed and there was a guard bee that kept buzzing me so I did not tarry .  It is obvious I failed to snug it up to the hive and bees can get in and out along the length of it.   I will slip out later tonight and make it a tighter fit.  (I just took care of that.)
Look closely and you will see some pollen coming in.  It is not in Spring or Summer quantities but there is enough to show we have flower most of the year in the Southern California temperate zone along the coast.  There is a dearth but nothing like they have in most of the country during the Winter.
By four PM the bees were all back inside and keeping the hive ball at 90 degrees or so.

Merry Christmas, keep your personal hive snug and warm.  Plus consider The Gift Of Bees in the previous post.

Tuesday, November 23, 2010

The Gift of Bees

We are coming up on Thanksgiving Day here in the US and my annual suggestion.  It is a time to share a little with those who have less.   There are many ways to do this.  I choose to give in those areas I am involved, in this case that means bees.

There is a way you can give The Gift Of Bees.  The Heifer Foundation provides all sorts of livestock in countries all over the world.  One of the things they provide is a hive of bees.  You can give a cow or donkey if you have the means but a gift can be as small as a duck or chickens.   You select what fits your budget or the item you are interested in.


Use this link for a Gift Of Bees.  The page will have links for a number of other critters to donate, choose your favorite species and know it is going where it is needed.

Check up on the Heifer Foundation on your own, I am confident you will find it a worthy charity that returns the donations to those in need and does not misuse them or your trust.

Happy Holidays for the Bees in The Dale.

Thursday, November 4, 2010

It Is Hot In The Dale



Another extreme bout of Indian Summer has hit The Dale with temps in the 90's and 100's. At 5pm it is still over 90 and the bees are bearding in search of some cooling.

 If you look closely you will see the entrance reducer on this hive.  Yesterday afternoon I happened to look at this hive and they were very agitated.  It was much more than orientation flights which usually happen earlier in the day around here.   I thought it might be honey robbing but I did not see any fighting going on.  Honey robbing can be endemic this time of the season with many pollen and nectar sources drying up.

I knew they were in an agitated state so I got fully garbed to put the entrance reducer in place so they would have less area to defend.   This is a very strong and active hive but there is no reason to expose them  any more than necessary.

I had proof very quickly how agitated, I had forgotten to put on my rubber boots and one of the bees nailed my foot through the cotton socks.   I should have known better.    One bee followed me into the laundry room but left.  I went inside to disrobe and found out a couple bees had been hanging on me somewhere.  One of the dogs spotted the bee and declared :"Fly, its a fly." and tried to bite it until she realized her mistake.  Then she was screaming  BEE!!  BEE!  Between us we dispatched her antagonists.   A little later the boy dog found the dead bee on the floor and commenced to bark loudly, letting us know he had protected us from evil. 



 The other hive was normal yesterday and I did not want to disturb them any so I did not do anything.   This afternoon they seemed to have the same excessive activity so I slipped an entrance reducer on that one too.   Within 10 minutes they seemed to have calmed down.  This is the nice hive, the Playa bees and I was able to put the piece on without donning my bee suit but I did not stay around long either.

Temps are supposed to drop 20-30 deg by the weekend so things should be back to normal and both hives are now set to defend themselves from robbing.

Wednesday, October 13, 2010

Max's Work At Work

Max Wong has been on local television and also written for her local newspaper.  Her hard work is already starting to pay off.  This morning the Bee Rescue Hotline had a message from Steve in Carson.  Finally something in my area and I was off on my mission.
Steve's family has a commercial garden next to Cal State Dominguez Hills.  He had a bee problem and had caught Max on KABC-TV.  Being a gardener he was not interested in terminating his bees but in saving them.    He said the bees were in a shed and I had visions of a small rubberized thing from Home Depot and a simple heroic bee rescue.  Hah!

The shed turned out to be an ancient wooden trailer like they used to haul to construction sites. It is not stable enough for any major deconstruction..  It was used by Steve's dad as tool shed and the bees inside had become a concern for Steve when Dad wanted to do a little work now and then.

The bees had full access from an opening on the West side of the building and were very active.  They were not aggressive to us but were active.  Click on the picture and you can see columns of comb on the right side.  Steve did not thing the opening was much deeper than the size of the hole and had no idea how far back it went.   Apparently in the past bees were at the other end of the shed and had been terminated.  That was not the plan for today.
 Over the years the bees had swarmed often, usually to the adjacent tree. Steve has seen them many times in the tree..  Steve wanted to protect his dad but did not want to destroy the trailer.  Given it's age and condition I did not believe a cut out would work.
 That left a trap-out.  Once we went inside there were a few bees around a couple of the windows and all of the windows were heavily stained with yellow bee poop.  The end of the shed under the hive was littered with thousands of dead bees.  There was a circle at least two feet across of dead bees. The morticians had found a place to dump the bodies.  They had obviously come for a single spot but I did not identify it.   There were a number of holes in the interior roof but I did not see any being used while we were there.  There were less than 10 bees inside at that time.


After some discussion I decided a trap-out was impossible with the holes to the interior of the shed.  Those holes had to be sealed shut first and that does not deal with the exterior roof.   It is covered with old wooden shingles and is probably full of holes too.   There were wasps flying under the roof on the other end.  Just what I needed a turf war. LOL.
  
 No cut-out due to the age of the trailer they did not want destroyed and no trap-out because of the many holes at yet not located.  The main thing was to protect Dad.   Steve will get some space filling foam and try to fill any holes inside and see if he can keep the bees out so Dad can work in safety.

Then we will see if he can use the hive as a swarm source.  Using what I brought along, I sprayed a nuc with Lemon Pledge and placed it next to the hive.  This hive is so active they must swarm several times a year.  That will do for now, until the interior hole patching is done.  If  the hole patch does not work more drastic measures may be the only option but that will wait.

On the good side, Steve is a gardener with a huge property loaded with plants and some weeds. He would love to have hives permanently located on the property.  Before going on this mission I checked the Carson Municipal Code and found no mention of bees or apiaries.  It may be quite legal for him to keep them on site.  And Backwards may have found a friendly site for those of us who end up with evicted bees looking for a home.
After the patch work is done I may be going to LA Honey with Steve for his own hives and he is interested in our meeting at the end of the month..  All good things that started with Max doing her bit on the tellie.